Search by brand

Basetta di verifica per Auto 1/32 1/24 "Rodaggio Motore Trasmissione Gomme" -SLT10063-

Basetta di verifica per Auto 1/32 1/24  "Rodaggio Motore Trasmissione Gomme"  -SLT10063-Basetta di verifica per Auto 1/32 1/24  "Rodaggio Motore Trasmissione Gomme"  -SLT10063-Basetta di verifica per Auto 1/32 1/24  "Rodaggio Motore Trasmissione Gomme"  -SLT10063-Basetta di verifica per Auto 1/32 1/24  "Rodaggio Motore Trasmissione Gomme"  -SLT10063-Basetta di verifica per Auto 1/32 1/24  "Rodaggio Motore Trasmissione Gomme"  -SLT10063-Basetta di verifica per Auto 1/32 1/24  "Rodaggio Motore Trasmissione Gomme"  -SLT10063-Basetta di verifica per Auto 1/32 1/24  "Rodaggio Motore Trasmissione Gomme"  -SLT10063-
Use Mouse Wheel to Zoom In/Out
Price:

53,90 VAT included (22%)

Item code: 10063
Type 2: 1Pz
Free field 1: SLT10063
Brand: Slotcars.it
Availability: Not available
Quantity:

Description

A beautiful and practical test bench for Slot cars 1/32 and 1/24. It is made with laser cutting for the maximum accuracy and is a needful tool to running-in motors, transmissions and also to clean the tires of your 1/32 models. You can also use it as test equipment to verify that the motor cables have been installed correctly.



Running-in tires: Used to remove the shiny from the tires when are new.
Use the sandpaper provided.
Once the sandpaper is positioned in his seat must be wet in correspondence of the support areas of the tires with liquids as WD40 or additive for tires so that the tire rotates freely.
Begin to spin the tires at a very low voltage to obtain the desired rotation of the wheels to prevent the liquid put on the blocks is fired out.
While doing this operation it must be kept under control in order to add liquid if necessary.



Pneumatic cleaning: Use the pans with fabric wetting it thoroughly with the Avio or Zippo. Starting with low voltage up to the desired rotation speed. The AVIO or Zippo cleans tires and it evaporates quickly, leaving wheels turn a little bit more as the liquid is gone, the result will be the warming-up of the tires that will make them ready for performance.



Application of liquids: Use pans and fabric wetting it with the additive, start with the voltage at 0V and increase it gently until the wheels begins to turn. More they rotate slow more the liquid will be spreaded correctly.



Running-gear: Place the scale model on the reels then begin to run the model at a low speed and sometimes increase the speed to medium speed (not high).
The model can run for several hours, more runs, more will become silent. During the running-in we recommend to lubricate the bearings of the motor axle and of the rear wheel axle.
Sometimes lubricate the axes of the rollers of the bench itself.


Running-in Engine: Place the model with or without wheels and run at 3 volts in the correct direction of rotation for about 1 hour. Once finished the running, lubricate the bearings.



Package content:



- Test bench assy

- 2 felt blocks

- 2 sandpaper blocks

- 2 shimming blocks

- 6 blocks to lock the model in

place

Size:



Width 130mm

Length 220 mm

Thickness 12mm

The customers that have purchased this product, have also chosen these items

Pagamenti sicuri con Paypal e Carte di credito
Invoice software
^